More and more people are aware of how hazardous to their health can be the air full of smog, suspended dust and unpleasant odors, usually indicating the presence of volatile organic compounds. Contaminated air does not serve our health. We feel it especially in autumn and winter, that is at the peak of the heating season. The air quality in our homes can, fortunately, be easily improved with the help of appropriate devices. The SAP41 air purifier is equipped with a 6-stage purification process. After passing through all six elements of the system, the air is free of all pollutants such as dust, bacteria, viruses and other allergens.
There are 4 filters in SAP41 – cold catalysis, active carbon, antibacterial and HEPA – ionizer and UV lamp. Such a comprehensive purification process guarantees removal of 99.95% suspended PM2,5 (not greater than 2.5 μm in diameter), 99.99% bacteria and viruses and 99% volatile organic compounds, e.g. formaldehyde, from the air.
The activated carbon filter is designed to eliminate unpleasant odors and volatile organic compounds from the air. Cold catalysis filter, which works similarly to the predecessor, but in a much wider spectrum, removes carbon monoxide, hydrogen sulphide, ammonia, benzene, formaldehyde and other harmful volatile substances from the air. The antibacterial filter eliminates bacteria, viruses and fungi and prevents their development in the device itself. The last of the filters – HEPA – retains the smallest impurities, odors and volatile compounds. In the SAP41 model, the ionization efficiency is 10 × 106 ions per second. Thanks to this solution, the device very effectively reduces the harmful effects of positive ions emitted by electrical equipment. UV lamp, which damages the cell nuclei of microorganisms, has a supporting function, ultimately sterilizing the stream of air flowing through the device.
The SAP41 air purifier has been designed for areas of up to 40 m2. The reason for this is high CADR efficiency index (Clean Air Delivery Rate), thanks to which it is able to deliver up to 165 m3 of purified air per hour.
The electronic control system, in which the SAP41 model is equipped, allows for easy and intuitive management of the purification process. The device operates at three speeds, which can be controlled on the control panel or by remote control – basic (500 rpm), medium (700 rpm) and high (900 rpm). You can check the current speed on the cleaning speed indicator located on the control panel. An important feature of the SAP41 is the timer function. Thanks to it, you can determine how long the device will work. This may be minum1 hour, maximum 12 hours. After this time, the purifier will turn itself off. SAP41 is characterized by low-noise operation.
Depending on the speed at which the device is currently running, it varies from 25 to 40 dB. The remote control has the same set of buttons as found on the control panel. Thanks to this, controlling the device is easy and intuitive. The remote control is powered by batteries included in the set.
PRIME3 – Consumer Electronics & Small Domestic Appliances
Puławska 12, Baniocha
tel: +48 22 688 08 00
2N-Everpol Sp. z o.o.
Puławska 403A, Warszawa
XIII Wydz. Gosp. Sądu Rej. Warszawa